Step 1. Clay exploitation
Clay excavated from Thu Bon river and transported back the pottery village by boat
Step 2. Clay trimming
The process of mining the clay is handled very strictly. The first stage is to select local small patches of land, on the water. The lines are marked out, and then using a spade cut 4 times to trim around the edges, then cut 2 times to dig the block out.
 
Step 3. To step on clay foots
After clay is enough water. Worker continuous step on clay by foots until plastic clay
Step 4. Worker knead clay
The clay is stuffed by hand. This stage by pushing your mouse will charge made on land stuffed chair. The soil will push out into the earth formation eel (height: 1metres) and then break out into the soil and scooping out handfuls workers broaching broaching will land into shape.
 
Step 5. Whittle
Worker whittle ceramics on potter's wheel. Products based on the type and size that the number of land use. The number 7 pot needs 7 types of clay, the number 5 needs 5 types, ...I only need a handful of earth, that is enough.

 
Step 6. Scrape and exposure of products
The some of products need to smooth face - using a large clam cover, rub the surface for smooth, it's often used to smooth face of the inner earthen pot. finally they are scrape the bottom and dried
 
Step 7. Cool edit – exposure of products
 After products are dryed. Products put into cool edit to complete.
 
Step 8. Products are  loaded into oven
After the product is dryed completely, it will burnt in oven. All of product concentrate in oven at the same time, so products is burnt steady fire, craftsman must know to load products into oven, how fire can thread one's way through products. The oven has high-temperature oven and fire regularly, they also add the coal.
 
Step 9. Burn
Material burn is firewood. Now Thanh Ha uses only willow wood (Casuarina), cuted into section the tree trunk and dried
Step 10. Opening kiln
Burn 1-3 days - dependence on big kiln or small kiln, break down the kiln after a product run. The products transported to sale at Hoi An market or neighbour market or bought at kiln by near and far trader
Actually:
The current method of making pottery conserve traditional features with polished hands, or burn by wood. But in order to increase productivity as well as additional design, the villagers combined with plaster casting methods to create more diversity and productivity products.
- Design:
 
- Mould
 
- Drying mould
- Pouring terrcotta
 
- Cutting hole
- Drying
- Burning
gốm Thanh Hà